Polystyrene insulation boards 100mm EPS 70

Expanded polystyrene (EPS) is moisture resistant, compatible with most building products except materials containing solvents.

EPS is rot proof, unaffected by bacteria, moulds or fungi and is non-toxic, non-irritant and odourless.

EPS does not contain CFC or HCFC but is a combustible when tested to BS476: Part 4 and will ignite with a flame.

The material should be stored under cover protected from direct sunlight and out of contact with ground moisture.

APPLICATION:

Thermal insulation subject to low mechanic loads

Thermal insulation of walls and ceilings from the bottom in Joint less Warming Systems [BSO], i.e. insulation performed in a light-wet method

Insulation of walls with cladding, ventilated by air slots

Thermal crown insulation made under the plaster and as insulation of lintels and door frames

Insulation of ceilings made of reinforced concrete as lost planking

Insulation of steep roofs laid under the bearing structure

Size: 1000mm x 500mm

Pack of 6 boards - 3sqm

We are sorry but this product is available for pick up or delivery within London and South East area using our own vehicles (free of charge if you spend minimum £200). For more details please click “delivery” link.