FEATURES:
CEKOL C-35 is a high quality material used for smoothing and refining of external walls (façades) of buildings, but it can also be used internally, particularly in rooms exposed to high humidity (e.g. bathrooms, saunas, refrigerated chambers).

PROPERTIES:
CEKOL C-35 is an elastic, frost and water proof plaster. It is a dry mixture of high quality white cement, white mineral fillers and modified substances which guarantee excellent workability and adhesion to mineral bases (e.g. concrete, bricks). CEKOL C-35 does not contain toxic substances or components which turn yellow when exposed to atmospheric conditions. It is an excellent primer for emulsion, acrylic, gloss and mineral paints, where its white colour provides better coverage for paint so to help achieve a full colour effect. CEKOL C-35 is recommended as a top layer of CEKOL CS thermal insulation system.

BASE PREPARATION:
The plaster has an excellent adhesion to concrete, bricks, ceramist blocks, plasterboards and blocks. The surface being adhered to must be flat, dry, clean and free from dust, grease and paint prior to plastering to ensure a good bond.
Note:Strongly absorbable bases should be primed with CEKOL DL-80 priming emulsion.

APPLICATION:
Pour the package contents to water in the proportion of 0.35 litre of water for 1 kg of dry powder and mix thoroughly until a uniform thick mixture is obtained. Then wait 3 minutes and mix thoroughly again. Apply the plaster to previously prepared surface with clean stainless steel or plastic tools. After preliminary setting of the material, small finishing corrections of the surface are possible. It is recommended to apply layers not thicker than 5 mm at a time. Painting is possible after plaster is fully set. In order to reduce paint wastages, set CEKOL C-35 surface should be primed with CEKOL DL-80 priming emulsion or primer recommended by the paint manufacture. Layer of fresh plaster should be protected against excessive drying.

TECHNICAL DATA:
CEKOL C-35 meets the requirements of PN-EN 998-1 OC CSII W1, AT-15-4983/2001, AT-15-5831/2003
Mixture proportions: 0.35 l of water for 1 kg of dry powder
Pot life: 3 to 4 hours, depending on temperature
Coverage:1.5 kg/m² for 1 mm thick layer
Layer thickness: 1 to 5 mm
Work temperature: +5^oC to +25^oC
Compression strength after 28 days: ≥ 4 MPa
Water absorption: c ≤ 0,40 kg/m²▪min^0,5
Product has the National Institute of Hygiene (PZH) Attestation, ITB Technical Approval and ITB Certificate of Conformity

PACKAGING:
Paper bags with PE lining - 5; 20 kg

STORAGE:
Store in original packages, in a dry compartment.
Shelf life up to 12 months.