Fast 20kg Flexible White Filler

Application 
 
FAST G1 is an excellent putty designed for finishing and decorative works in construction. Due to its characteristics, is ideally suited as an alignment layer for all kinds of coatings. It can be used to combine elements of plaster, filling cavities on the surface of walls and ceilings inside buildings. Finishing coat FAST G1 is a ready, dry mix produced on the basis of powdered anhydrite with fillers and modifiers to improve plasticity and ease of application. While bonds are not subject to the phenomenon of shrinkage, and after drying can be easily treated. The big advantage is extended standby time and mortars to work Snow White, which reduces consumption of paint when painting.

Consumption 
 
Approximately 1 kg of dry matter per 1 m 2 with a thickness of 1 mm.

Technical Data 
 
Base: a mixture of anhydrite manufactured with fillers and modifiers 
Mixing ratio: 5.5 to 7.0 liters of water per 20 kg dry weight 
Density after earning water: about 1.7 kg / dm 3 
On Time: about 12 hours (while maintaining resp. terms) 
Open time: 20 minutes 
Adhesion to substrate: at least 0.5 MPa 
Flexural Strength: minimum of 1.0 MPa 
Compressive Strength: minimum of 2.0 MPa 
Substrate and ambient temperature: +5 ° C to +25 ° C 
The maximum thickness of one layer to 2 mm 
Reaction to fire: Class A1

Packaging 
 
20 kg bag.