Adhesive for rigid PVC 250ml
Quick drying mounting adhesive based on chlorinated synthetic resins for bonding and mounting rigid PVC elements.
csx 411
Benefits:
Excellent gluing and fixing
Ready to use
Easy-to-apply packaging with a brush
Strong and durable bond
Resistant to cold and boiling water
Quick bonding formula
Applications:
gluing of sanitary system pipes
bonding of plumbing
bonding of pipes for hot and cold water
bonding of gutters from rigid PVC
close-fitting of PVC pipes
fixing of fittings
gluing of rigid PVC
gluing of gutters
bonding rigid PVC, sanitary system pipes and plumbing
Application Instruction - Clean, degrease and dry the surface. For PVC pipes it is necessary to check the proper fitting of the two pipes ends. Apply with a brush thin and even layer of glue on both surfaces. Slight the pipes together without twisting. Remove the excess of glue with a clean rag. Let glue 10 minutes after application to dry.
Cleaning - Glue contaminations can be removed with trichloroethylene.
Caution - Joining gets full bond after 24 hours. The pipe can be put under pressure after 2 hours, drains - after 6 hours.
Technical data:
| Uncured: | |
| COMPOSITION | chlorinated synthetic resins and volatile solvents |
| COLOUR AND CONSISTENCY | transparent |
| DENSITY AT TEMP.+20oC | 0,93 g/cm3 |
| APPLICATION TEMPERATURE | from +15oC |
| OPEN TIME | 2-3min |
| DRYING TIME | 10 min |
| FULL CURE TIME | after 24 h |
| VISCOSITY AT TEMP.+20oC | 5 000 mPa*s (± 750 mPa*s) |
| PRODUCTIVITY | 380-400g/m2 |
| FLAMMABILITY | flammable |
| SOLUBILITY | MEK, THF, cykloheksanon |
| Cured: | |
| DRY EXTRACT | 27,5 % (± 1,5 %) |
| THERMAL RESISTANCE OF JOINT AFTER CURE | up to +80oC |
| JOINT’S RESISTANCE TO INLET PRESSURE | up to 32 bar |
